Contrast way low for VA Panel

Home Forums General Discussion Contrast way low for VA Panel

This topic contains 2 replies, has 2 voices, and was last updated by  Diego Ferreyra 2 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #15021

    Diego Ferreyra
    Participant
    • Offline

    Hi, Im using spider5 Pro version and had been looking how to calibrate the monitor with displaycal on messurment I manage to keep everything right in green with a delta 0.5 aprox.

    My issue is when I run the test and my basic information shows that contrast is around 1100 when it should be around 2500 minimum.

    am I doing something wrong or is it a limitation of the spyder 5 colomiter?

    My monitor is a samsung C34F791 I have set mode to wide garmut lcd and correction to auto.

    I have also downloaded datacolor software and imported corrections from it.

    thanks for any advice.

    Attachments:
    You must be logged in to view attached files.
    #15023

    Florian Höch
    Administrator
    • Offline

    Hi,

    am I doing something wrong or is it a limitation of the spyder 5 colomiter?

    The latter.

    #15024

    Diego Ferreyra
    Participant
    • Offline

    Thanks for the quick answer and your great work!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS