Calibration with Davinci Resolve

[Ajay Bhadresa]

Hi there,

I’m trying to calibrate my FSI monitor which is connected to Davinci Resolve via a Blackmagic Decklink Mini Monitor in conjunction with a colormunki smile.  I’ve been able to calibrate the display monitors without a problem.  However, when I start the process for Resolve I input the IP address and port and it says connected but doesn’t send through the test patterns to Resolve.  It then comes up with an error saying ‘broken pipe’.  I’ve tried different USB ports but to no avail.

[Florian Höch]

Hi,

you need to use the SpectraCAL CalMAN interface, not Lightspace. You may also need to add an exception in your Firewall for DisplayCAL.

[Author]

Posts