Home › Forums › Help and Support › Problem with Spyder3
- This topic has 3 replies, 2 voices, and was last updated 5 years, 9 months ago by Florian Höch.
-
AuthorPosts
-
2018-06-15 at 17:36 #12382
Good afternoon,
I’ve been trying to make this duo work for two days but it’s impossible.
I install the Displaycal 3.5.3
I indicate where you can find the Argyll_V2.0.0 folder (S.O W7 64x)
I insert the Colorimetro USB into a USB port, so I recognize it and the Displaycal program in the “instrument / port” box tells me which model is configured, which matches what I have.
Now I pulse “calibrate and profile” and here comes the error, it tells me the following thing: “Dry run, Check the log to see the command line”7: 57: 19,913 Calibrate and profile
17: 57: 19,963
17: 57: 20,003 ——————————————— ———————————–
17: 57: 20,003 Dry run
17: 57: 20,003
17: 57: 20,003 Working directory:
17: 57: 20,003 c: \
17: 57: 20,003 users \
17: 57: 20,003 user \
17: 57: 20,003 appdata \
17: 57: 20,003 local \
17: 57: 20,003 temp \
17: 57: 20,003 DisplayCAL-qzozsw \
17: 57: 20,003
17: 57: 20,003 Command line:
17: 57: 20,003 C: \ Argyll_V2.0.0 \ bin \ dispcal.exe
17: 57: 20,003 -v2
17: 57: 20,003 -d1
17: 57: 20,003 -c1
17: 57: 20,003 -yn
17: 57: 20.003 “-P0.5,0.5,1.5”
17: 57: 20,003 -qm
17: 57: 20,013 -t5000
17: 57: 20,013 -g2.2
17: 57: 20,013 -f1.0
17: 57: 20,013 -k0
17: 57: 20.013 -A4.0
17: 57: 20,013 -b
17: 57: 20.013 “ASUS VE278 # 1 2018-06-13 17-57 D5000 2.2 M-S XYZLUT + MTX”
17: 57: 20,013
17: 57: 20,013 Dry run ended.Where is the problem?
What can be the solution?Thank you all.
C:\Argyll\bin>dispcal.exe -R -v -D3
get_a_display called with ix 0
MonitorEnumProc() called with hMonitor = 0x10001
MonitorEnumProc() set initial monitor info: 0,0 1920,1080 name ‘\\.\DISPLAY1’
get_displays about to get monitor information for 0
Mon 0, name ‘\\.\DISPLAY1\Monitor0’
Mon 0, string ‘Monitor PnP genÚrico’
Mon 0, flags 0x3
Mon 0, id ‘MONITOR\ACI27F6\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002’
Mon 0, key ‘\Registry\Machine\System\CurrentControlSet\Contro l\Class\{4d36e96e-e
325-11ce-bfc1-08002be10318}\0002’
EnumDisplayDevices failed on ‘\\.\DISPLAY1’ Mon = 1
get_displays added description ‘DISPLAY1, at 0, 0, width 1920, height 1080 (Prim
ary Display)’ to display 0
Selected ix 0 ‘\\.\DISPLAY1′ DISPLAY1, at 0, 0, width 1920, height 1080 (Primar
y Display)’
Argyll ‘V2.0.0’ Build ‘MSWin 32 bit’ System ‘Windows V7 SP 1’
new_icompath: called with mask 0x1ffff
usb_get_paths: found instrument vid 0x085c, pid 0x0300
serial_get_paths: There don’t appear to be any serial ports
Setting up the instrument
new_inst: called with path ‘libusb0-0001 (Datacolor Spyder3)’ type ‘Spyder3’
new_icoms ‘libusb0-0001 (Datacolor Spyder3)’ itype ‘Spyder3’ dctype 0x10002
spyd2_init_coms: about to init coms
spyd2_init_coms: about to init USB
usb_open_port: open port ‘\\.\libusb0-0001’ succeeded
spyd2_init_coms: suceeded
spyd2_init_inst: called
spyd2_read_all_regs: about to read all the EEProm values
spyd2_readEEProm_imp: addr 5, bytes 1
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 6, bytes 1
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_read_all_regs: hwver+fbits = 0x0437
spyd2_readEEProm_imp: addr 8, bytes 8
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_read_all_regs: serno = ‘07068779’
spyd2_readEEProm_imp: addr 16, bytes 108
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 128, bytes 108
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 256, bytes 108
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 384, bytes 108
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 240, bytes 4
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 244, bytes 4
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 248, bytes 4
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 252, bytes 4
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 364, bytes 4
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 368, bytes 4
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_readEEProm_imp: addr 372, bytes 4
spyd2_readEEProm_imp: returning ICOM err 0x0
spyd2_read_all_regs: all EEProm read OK
spyd2_GetReading_ll: clocks = 500, minfc = 0, maxfc = 0
spyd2_GetReading_ll: reading returns ICOM code 0x0
spyd2_init_inst: inited OK
spyd2_setLED: set to on
spyd2_setLED: set to off
Instrument Type: Datacolor Spyder3
Serial Number: 07068779
Hardware version: 0x0437
config_inst_displ suceeded
new_dispwin called
new_dispwin: About to open display ‘\\.\DISPLAY1’
Windows display RASTERCAPS 0x7e99, BITSPIXEL 32, PLANES 1, NUMCOLORS -1, COLORRE
S 24
new_dispwin: fdepth 8, rdepth 8, ndepth 8, edepth 16
new_dispwin about to create window
new_dispwin window created
dispwin_get_ramdac called
dispwin_get_ramdac returning OK
Saved original VideoLUT
dispwin_set_color called on disp ‘\\.\DISPLAY1’
dispwin_set_ramdac called
dispwin_set_ramdac returning OK
dispwin_set_color about to paint color 0.501961 0.501961 0.501961
dispwin_set_color paint done
dispwin: update delay 200 msec = patch_delay 200 + disp_settle 0 – inst_reactio
n 0
dispwin_set_color delaying 200 msec
new_dispwin: return successfully
Place instrument on test window.
Hit Esc or Q to give up, any other key to continue:Well in the end there were no errors and you have finished performing the tests:
C: \ Argyll \ bin> dispcal.exe -R -v
Setting up the instrument
Instrument Type: Datacolor Spyder3
Serial Number: 07068779
Hardware version: 0x0437
Place instrument on test window.
Hit Esc or Q to give up, any other key to continue:
patch 3 of 3
patch 17 of 17
Uncalibrated response:
Black level = 0.5796 cd / m ^ 2
50% level = 0.60 cd / m ^ 2
White level = 0.46 cd / m ^ 2
Approx. gamma = -0.38
Contrast ratio = 1: 1
White chromaticity coordinates 0.3207, 0.3330
White Correlated Color Temperature = 6066K, FROM 2K to locus = 2.0
White Correlated Daylight Temperature = 6069K, FROM 2K to locus = 3.0
White Visual Color Temperature = 6006K, DE 2K to locus = 2.0
White Visual Daylight Temperature = 6160K, DE 2K to locus = 2.8
Effective Video LUT entry depth seems to be 8 bits
The instrument can be removed from the screen.Where will the error be?
Thanks for the help
2018-06-15 at 18:49 #12383You have enabled dry run in the “Options” menu (under “Advanced”).
2018-06-20 at 14:56 #12440Solved.
I had selected all the available options and some was the one that prevented me from calibrating.
What is the purpose of each options section? so as not to make the mistake again.Thank you
2018-06-21 at 18:14 #12445All the options are explained in the documentation.
-
AuthorPosts