Noob question??

Home Forums Help and Support Noob question??

Viewing 10 posts - 16 through 25 (of 25 total)
  • Author
    Posts
  • #35728

    Vincent
    Participant
    • Offline

    It’s the only think it can do. Same for i1Profiler.

    #35729

    Matteusz10
    Participant
    • Offline

    Where in displaycal i can check primaries?

    #35731

    Matteusz10
    Participant
    • Offline

    Ok primaries are srgb, but still nothin change, i try DC loader, load calibration curves, and nothing….

    #35732

    Vincent
    Participant
    • Offline

    Ok primaries are srgb, but still nothin change, i try DC loader, load calibration curves, and nothing….

    Check if profile’s calibration curves contain something different from linear calibration. DisplayCAL’s profile info, calibration curves combo (upper) should do this.

    #35733

    Matteusz10
    Participant
    • Offline

    ok, i left this for now… nothing works with icc profile, like displaycal wont do nothing with calibration… well when i do verfication after calibration everythings looks ok- green :), but nothing changes in my opinion. I check this in hcfr, and it show BIG dE errors with greyscale and color accurate. Any idea why ? I start check now this 3dlut- 1 lut wdm_lut loader. After calibration in displaycal i checked in hcfr, greyscale looks better now, from 70-100 ire is almost perfect, but below still needs calibration, dont know what to do i displaycal settings. Color accurate is green now – dE, so its much better. Any sugestion what to do to makes dE errors looks green in displaycal and hcfr after calibration? 🙂

    #35734

    Vincent
    Participant
    • Offline

    Usually user set a wrong verification target in HCFR (preferences), or did not choose colorimeter correction, or choose wrong range or disabled video LUTs.

    Since no user data… who knows. Same fro displaycal since you did not check calibration curves…

    #35735

    Matteusz10
    Participant
    • Offline

    I did checked curves, but dont know how to read that.. Hah.. When is wrong or not… 😉

    • This reply was modified 1 month, 3 weeks ago by Matteusz10.
    #35737

    Matteusz10
    Participant
    • Offline

    well i trust more hcfr results than displaycal at the moment, i just dont believe that my monitor have so good color accurate without any calibration and so good grey scale , using only RGB GAIN without CUT-OFF or advanced option calibration white balance….

    #35738

    Vincent
    Participant
    • Offline

    Since it’s pretty clear that you don’t know what you are doing or what settings you are trying to validate with DisplayCAL or HCFR… it’s useless what you do trust or don’t trust.

    No data -> no support

    #35740

    Matteusz10
    Participant
    • Offline

    Well i calibrate my TV pretty well with hcfr-panasonic fz800. I checked also thx cinema Mode in hcfr, and everything looks ok, SO hcfr i think i got with good configuration. Problem is with my knowledge in displaycal heh.. Ok i put tomorrow some data info..thx for help  anyway.

Viewing 10 posts - 16 through 25 (of 25 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS