Home › Forums › Help and Support › My first calibration, goals, results & questions.
- This topic has 1 reply, 1 voice, and was last updated 6 years ago by Griffin.
-
AuthorPosts
-
2018-04-03 at 22:56 #11387
My setup is…
HTPC –
Windows Kodi/DSPlayer/MadVRScreen –
Blackout cloth homemade screen.Sony VPL-HW40ES Projector –
D65 Color Temp
709 Colorspace
0-255 dynamic rangeMadVR –
RGB output 0-255 (Trying to get max for HDR>SDR but unsure if this should be set this way)
Native bit depth 10 or higher (Not sure if this is right for my PJ, I heard it has a 12-Bit color engine???)
HDR>SDR Conversion using Pixel Shader
Display is calibrated to BT.709, BT.709 2.20Meter –
i1 Display ProWhy do I want a 3DLut?
My screen material is throwing off my RGB balance (too much blue) and due to the very limited calibration options in the HW40ES projector I’m unable to do proper correction at the projector level to compensate.Questions –
Should I worry too much about using a correction matrix for my i1 Display Pro meter?The only built-in correction option I see in DisplayCAL3 that seems to be for projectors is ‘Spectral:Projector (Marantz HP Panasonic Projectors Hybrid EDR)
Also any idea if I should be using the White Level Drift Compensation option for my setup?[/QUOTE]
First Results
I ran my profile build for the first time last night to try and correct the colors coming off my projection screen. The best I could dial in my PJ was around 6700k trying to get to D65. Here is the flattest gray curve I could achieve with my limited projector adjustment options and my blackout cloth screen….
Here’s my report after building the profile…
I’m noticing that some of the device information and attributes show as Reflective and glossy, I’m wondering if that is the best setting considering I’m using a matt finish projection screen. Also my preferred gamma is 2.4 (as I watch in a very dark environment) but it seems the profile is targeting 2.2.
I’m very inexperienced with this stuff. Looking at the color gamut on the final report it looks like I’m only hitting about 80% of rec.709 (I’m assuming that’s what it says) and I assume that is because my screen is killing my reds.
Any input/advice gladly appreciated.
Device model name (ASCII) madVR
Luminance 33.80 cd/m²
Media white point
Is illuminant Yes
Illuminant-relative XYZ 94.22 100.00 110.78 (xy 0.3089 0.3279)
Illuminant-relative CCT 6722K
ΔE 2000 to daylight locus 1.24
ΔE 2000 to blackbody locus 4.03
Media black point
Illuminant-relative XYZ 0.1785 0.1892 0.2090 (xy 0.3095 0.3280)
Illuminant-relative CCT 6687K
ΔE 2000 to daylight locus 1.05
ΔE 2000 to blackbody locus 3.88
Colorants (PCS-relative)
Red XYZ 43.12 22.64 4.83 (xy 0.6108 0.3207)
Green XYZ 42.70 73.93 14.49 (xy 0.3257 0.5638)
Blue XYZ 15.81 7.90 70.68 (xy 0.1675 0.0837)
Video card gamma table
Bitdepth 16
Channels 3
Number of entries per channel 256
Channel 1 gamma at 50% input 1.00
Channel 1 minimum 0.0000%
Channel 1 maximum 100.00%
Channel 1 unique values 256 @ 8 Bit
Channel 1 is linear Yes
Channel 2 gamma at 50% input 1.00
Channel 2 minimum 0.0000%
Channel 2 maximum 100.00%
Channel 2 unique values 256 @ 8 Bit
Channel 2 is linear Yes
Channel 3 gamma at 50% input 1.00
Channel 3 minimum 0.0000%
Channel 3 maximum 100.00%
Channel 3 unique values 256 @ 8 Bit
Channel 3 is linear Yes
Device to PCS: Intent 0
Matrix 1.0000 0.0000 0.0000
0.0000 1.0000 0.0000
0.0000 0.0000 1.0000
Input Table
Channels 3
Number of entries per channel 2048
Color Look Up Table
Grid Steps 33
Entries 35937
Output Table
Channels 3
Number of entries per channel 2048
PCS to device: Intent 0
Matrix 1.0000 0.0000 0.0000
0.0000 1.0000 0.0000
0.0000 0.0000 1.0000
Input Table
Channels 3
Number of entries per channel 512
Color Look Up Table
Grid Steps 9
Entries 729
Output Table
Channels 3
Number of entries per channel 512
Red matrix column
Illuminant-relative XYZ 38.75 21.34 5.71 (xy 0.5889 0.3243)
PCS-relative XYZ 41.26 22.36 4.18 (xy 0.6086 0.3298)
Green matrix column
Illuminant-relative XYZ 37.56 71.15 15.68 (xy 0.3020 0.5720)
PCS-relative XYZ 40.85 71.25 12.32 (xy 0.3283 0.5726)
Blue matrix column
Illuminant-relative XYZ 17.91 7.51 89.40 (xy 0.1560 0.0654)
PCS-relative XYZ 14.31 6.40 65.99 (xy 0.1651 0.0738)
Red tone response curve
Number of entries 256
Transfer function Unknown
Minimum Y 0.0000
Maximum Y 100.00
Green tone response curve
Number of entries 256
Transfer function ≈ Gamma 2.14 100% (Δ 4.64%)
Minimum Y 0.0000
Maximum Y 100.00
Blue tone response curve
Number of entries 256
Transfer function ≈ Gamma 1.90 100% (Δ 3.94%)
Minimum Y 0.0000
Maximum Y 100.00
Characterization target [81082 Bytes]
Characterization device values [81082 Bytes]
Characterization measurement values [81082 Bytes]
Absolute to media relative transform Bradford
Matrix 0.8951 0.2664 -0.1614
-0.7502 1.7135 0.0367
0.0389 -0.0685 1.0296
Chromaticity (illuminant-relative)
Channel 1 (R) xy 0.5896 0.3140
Channel 2 (G) xy 0.2989 0.5602
Channel 3 (B) xy 0.1577 0.0731
Metadata
CMF_binary DisplayCAL
CMF_version 3.5.2.0
CMF_product DisplayCAL
License Public Domain
Quality high
OPENICC_automatic_generated 0
DATA_source calib
MEASUREMENT_device i1 displaypro, colormunki display
prefix CMF_
DATA_
MEASUREMENT_
OPENICC_
ACCURACY_
GAMUT_
ACCURACY_dE76_avg 0.314738
ACCURACY_dE76_max 1.550698
ACCURACY_dE76_rms 0.382771
GAMUT_volume 0.800592009514
GAMUT_coverage(dci-p3) 0.567
GAMUT_coverage(srgb) 0.7993
GAMUT_coverage(adobe-rgb) 0.5509Calibrite Display Pro HL on Amazon
Disclosure: As an Amazon Associate I earn from qualifying purchases.2018-04-03 at 23:08 #11389 -
AuthorPosts