-
Hi, I’m using and Ei1Display Pro Probe on a 16″ Mac Pro and trying to calibrate an Eizo CG279x. I’ve followed the instructions to the letter, however, whenever I launch the calibration it seems to ignore the delay override and as the calibration is starting, I see a message flash across the interface indicating that the software is still using a 200ms delay. I’ve tried everything and tried every increment from 600-2600ms, and I still always get the same results in the profile self check error. I always get 1.14 DE average and 5.29 DE peak. ALWAYS!, no matter how many times I’ve tried.
I’ve attached my setting below
Thanks so much
I’m super frustrated!!! Help!!!!!
-
This topic was modified 3 years, 10 months ago by Nick Bean.
Attachments:
You must be
logged in to view attached files.
The additional delay is not part of the instrument delay. That’s the whole point of it, it’s additional.
Display Calibration and Characterization powered by ArgyllCMS